Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015 79
2. Select the right or left piece to be sewn by tapping .
3. Select sewing material size ( p. 75).
4. Push the pedal forwards and sew the seam.
 The sewing progress is displayed graphically in the left pane
as a red bar.
Fig. 52: Sewing process
 The remaining sewing length per sewing step is displayed:
Correcting the fullness before or during the seam
1. Press foot pedal to position 0.
2. Change the fullness correction using the buttons + F% or - F%.
3. Push the pedal forwards and sew.
 The changed fullness value is applied and displayed.