Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015 77
2. If a higher or lower degree of fullness is required, use the arrow
keys to display more buttons.
3. Input the fullness using the buttons 0 to 16.
Information
The fullness value remains active until the next sewing step.
AUTO mode Correcting the fullness value
The fullness value can be corrected either by the buttons + F%
and - F% or the fullness correction parameter.
Fig. 50: Correcting the fullness value
To correct the fullness value:
1. Input the correction value for the fullness in percent.
Information for inputting numeric values:  p. 62.
2. Tap the OK button.
 The correction value is saved, and the previous user inter-
face is displayed again.