Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015 73
Right pane (4)
Another user interface or another operating mode can be selected
here.
6.4.1 Parameters that can be set
The following table lists the parameters that can be set in AUTO
operating mode.
Symbol/button Meaning
Program selection,  p. 74
Select the right or left piece to be sewn
Set the sewing material size,  p. 75
Other program parameters in operating
mode AUTO,
 p. 78
Temporarily setting the fullness value until
the next sewing step,
 p. 76
Applying a % correction to the fullness val-
ues of all sewing steps,  p. 77
Setting the needle thread tension.
If changed in AUTO operating mode, the
value is permanently saved in the sewing
program.
Setting the stitch length in mm.
If changed in AUTO operating mode, the
value is permanently saved in the sewing
program.