Operation Manual

Operating Instructions 650-10 - 02.0 - 10/201570
To set the curve support:
1. Input the curve support using the buttons 0 to 6.
MAN mode Other program parameters
A tap on the Other program parameters button will bring up an
overview of all available parameters.
Fig. 45: Other program parameters
Parameters Meaning
Manual Backtack Manual bartack
Needle Stop Position Up Needle position up when sewing stops
Value range: 1 (= on) or 0 (= off)
Foot Stroke Alternation Sewing foot alternation whilst the needle is
in the sewing material
Value range: 0 – 2.5 mm
Foot Pressure Sewing foot pressure
Value range: 1 – 10