Operation Manual

Operating Instructions 650-10 - 02.0 - 10/201568
6.3.1 Parameters that can be set
The following table lists the parameters that can be set in MAN
operating mode.
To set a parameter:
1. Tap the desired button.
 The user interface for setting the desired parameter is
displayed.
For some parameters the setting is more than just a numerical
value. These parameters are described below.
Symbol/button Meaning
Setting the fullness,  p. 69
Set the curve support.
Other program parameters in operating
mode MAN,
 p. 70
Inputting the needle thread tension
Inputting the stitch length in mm