Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015 57
Fig. 35: Softkey menu
2. Press the key.
 The display shows the next available program number:
Fig. 36: Copying a sewing program (1)
3. Press OK to load the program number.
Or:
Select another program number using / or input a
program number using the keypad keys 0 – 9 and then
press
the OK key.
 The program number is loaded.
The display shows the following information,
the P in the program number field flashes:
Fig. 37: Copying a sewing program (2)
4. Load the desired changes into the new sewing program.
5. Press the ESC key.
 The controller switches to Edit mode to Automatic mode.