Operation Manual

Operating Instructions 650-10 - 02.0 - 10/201552
The sewing program previously selected can now be edited.
The display shows the following information,
the P in the program number field flashes:
Fig. 29: Edit the sewing program
2. Use / to select the sewing program to be edited, the sleeve
side and the step; and use / to edit them.
The step to be edited can also be selected using the knee
lever.
 The selected step is shown bold in the program bar.
3. Use / to select the parameter to the changed for the
respective step, and use / to change it.
Changing further parameters for the current step
1. Use /to select the field .
2. Press the OK key.
 The submenu opens.
3. Use / to select the desired parameter.
4. Press the OK key to activate or deactivate the parameter, or
use 
/ to change its value and press OK to confirm it.