Operation Manual

Operating Instructions 650-10 - 02.0 - 10/201548
If is not assigned to the upper softkey:
1. Press the key.
 The softkey menu appears on the display:
Fig. 24: Softkey menu
2. Press key 5.
3. Press OK to load the program number.
Or:
Select another program number using / or input a program
number using the keypad keys 0 – 9 and then press the OK
key.
 The display shows the following information,
the P in the program number field flashes:
Fig. 25: Easy mode (2)
The following table shows the individual symbols on the display
and the functions of the keys on the control panel.
Symbol Meaning
Automatic step progression on or off
• Press the upper softkey
Current sewing program to be created
Current sleeve side to be created
(pre-set at the technician level)