Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015 45
Before you can start the sewing process, you need to switch to
the 1
st
step.
Proceed as follows to switch to the 1
st
step:
1. Sew, press the knee lever or press the OK key.
 The program switches to the 1
st
step.
5.4.2 Sewing process
Start the sewing process as follows:
1. Push the pedal forwards and sew.
 The following appears on the display:
Fig. 20: Sewing process in Automatic mode
Other parameters
Foot Press. (sewing foot pressure)
Fulln.Corr. (fullness correction)
•Use / to select the parameter
• Press the OK key.
•Use / to select the fullness correction or the
sewing
foot pressure.
• Select the parameter using the OK key
• Change values using /.
• Press the OK key to confirm.
•Press or ESC to exit the menu.
Program bar
Length per step in mm, or a dash
(-) if no automatic step progression
ESC, F, S No function assigned
Symbol Meaning
(1) - Program bar
(2) - Number
(3) - Current step
① ③②