Operation Manual

Operating Instructions 650-10 - 02.0 - 10/201544
5.4.1 Before starting sewing
Symbol Meaning
Quick programming (depending on the assignment)
• Press the upper softkey
Quick access function (softkey menu)
• Press the lower softkey
Program number
Value range: 000 – 999
•Use / to select the parameter
•Use / to change the program number.
Or:
• Input the program number using the numeric
keys 0 – 9 and confirm with OK as required
If you select program 000, the controller selects
Manual
mode.
Right sleeve / left sleeve
The machine can sew only right sleeves, only left
sleeves, or right and left sleeves alternately.
•Use /to select a right sleeve or a left sleeve
(if
programs exist for both)
Steps
Number of steps contained in the current sewing
program.
Stitch length
Value range: 1.0 – 4.0 mm
The stitch length can be altered before starting sewing.
The altered value applies throughout the entire sewing
program.
•Use / to select the parameter
•Use /to adjust the stitch length
Thread tension
Value range: 1 – 99
The thread tension can be altered before starting sewing.
The altered value applies throughout the entire sewing
program
•Use / to select the parameter
•Use / to change the thread tension