Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015 43
2. Push the pedal forwards and sew.
Sewing with fullness
1. Use the numeric keys 0 – 16 and to change the
fullness.
Or:
1. Change the fullness with the additional pedal (optional)
(if set at the technician level),  Service Instructions).
Altering parameters whilst within the seam
1. Press foot pedal to position 0.
2. Change the desired parameter on the control panel.
3. Push the pedal forwards and sew.
 The seam will be sewn using the altered parameter value.
5.4 Automatic mode
1. Use / to select the field .
2. Use / to select the program number 001 or another one
(if available).
 The controller switches to Automatic mode and the following
information appears on the display:
Fig. 19: Automatic mode
The following table shows the individual symbols on the display
and the functions of the keys on the control panel.