Operation Manual

Operating Instructions 650-10 - 02.0 - 10/201542
 The function is assigned to the upper softkey
and can be called up by pressing the key.
5.3.2 Menu for other settings
1. Use / to select the field .
2. Press the OK key.
3. Use / to select the desired parameter.
4. Press the OK key to select the parameter.
5. Change values using the / keys.
6. Press the OK key to confirm.
7. Press or ESC to exit the menu.
5.3.3 Sewing process
Sewing without fullness
1. Input values for stitch length, thread tension, curve support
and foot alternation.
Symbol Meaning
Alternate (sewing foot alternation)
Value range: 0.0 – 2.5 mm
Foot Press. (sewing foot pressure)
Value range: 1 – 10
Start Tack (bartack at seam beginning)
Value range: 1 (= on) or 0 (= off)
End Tack (bartack at seam end)
Value range: 1 (= on) or 0 (= off)
Thread Trim (thread cutter)
Value range: 1 (= on) or 0 (= off)