Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015 41
Fig. 18: Softkey menu
To select a function in the softkey menu:
1. Press the numeric key under the desired function.
2. Exit menu using ESC.
Assign a function to the upper softkey as follows:
1. Press the numeric key under the desired function
and the upper softkey at the same time.
Symbol Meaning
Manual bartack on
• Press key 1 and keep it pressed for a manual
bartack
Bartack suppression on or off
• Press key 2
 The bartacks are switched on or off
Needle position up or down
• Press key 3
 The needle is up or down when sewing stops
Automatic step progression on or off
(available only in Automatic mode)
• Press key 4.
 Automatic step progression is enabled/disabled
whilst sewing a seam
Quick programming
 Press key 5
Quick programming starts
Winder mode on or off
• Press key 6
• Press the foot pedal forwards
 The hook thread is wound on
• Press the foot pedal halfway back
 Winder mode is ended