Operation Manual

Operating Instructions 650-10 - 02.0 - 10/201534
Altering
the
fullness
• Press fullness key or additional pedal.
 The selected fullness value is activated.
At seam end
Remove
the
sewing
material
• Press the foot pedal fully back and keep it there.
 The end bartack is sewn (if activated).
 The threads are cut (if activated).
 The machine stops in the 2
nd
position.
 The needle is up. The sewing feet are raised.
• Remove the sewing material.
• Release the foot pedal.
 The sewing feet are lowered.