Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015 33
4.12 Sewing
Before starting sewing
Initial
situation
• Foot pedal in rest position.
 Machine is at a standstill.
 Needle is up. Sewing foot is down.
Position
sewing
material
at
seam
beginning
• Press the foot pedal halfway back.
 The sewing feet are raised.
• Position the sewing material.
• Release the foot pedal.
 The sewing feet are lowered onto the sewing
material.
At seam beginning
Start bartack
and sewing
the seam
• Push the foot pedal forwards and keep it there.
 Start bartack is sewn (if specified).
Then the machine sews along the seam at the
speed determined by the foot pedal.
In the middle of the seam
Stopping
sewing
• Release the foot pedal (position 0).
 The machine stops in the 1
st
position
(needle
down) or in the needle up position
(depending on the setting chosen).
The sewing foot is down or raised
(depending on the setting chosen).
Continue
sewing
(after releas-
ing the pedal)
• Press the foot pedal forwards.
 The machine continues to sew at the speed
determined
by the foot pedal.
Intermediate
raising
• Press the foot pedal halfway back.
 The sewing feet are raised.
• Correct the sewing material.
• Release the foot pedal.
 The sewing feet are lowered.