Operation Manual

Operating Instructions 650-10 - 02.0 - 10/201522
4.3 Threading the needle thread
The threading procedure varies with the threads and the types of
seams used.
Thread the needle thread as follows:
1. Plug the thread reels onto the thread reel holder and feed the
needle thread through the thread guide.
Important
The thread guide must be positioned vertically above the
thread reel holder.
2. Thread the needle thread as shown in the following figure.
Fig. 4: Threading the needle thread, low stretchability
WARNING
Risk of injury from sharp and moving parts!
Punctures and crushing possible.
Switch off the machine before threading
the needle thread.