Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015142
6000
–
6299
Error Internal error • Switch the machine off and
on again
• Perform a software update
• Contact customer service
6351
–
6354
Error Controller defective (I²C) • Replace the control
6400
–
6999
Error Internal error • Switch the machine off and
on again
• Perform a software update
• Contact customer service
7551
–
7659
Error • Internal error
• Cable disturbance
• Cables to the control panel
Interface defective
• Switch the machine off and
on again
• Eliminate source of
disturbance
• Perform a software update
• Replace the cable
• Contact customer service
9910 Error Tilt sensor:
• Machine head is tilted over
• Tilt sensor not fitted or
defective
• Erecting the machine head
• Fit or replace tilt sensor
Code Type Possible causes Remedial action