Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015 117
8.9.5 Connecting the control panel
OP3000 control panel
Fig. 80: Connecting OP3000 control panel
Connect the OP3000 as follows:
1. Tighten the control panel (3) to the bracket (4) and align it.
2. Insert the plug for the cable (2) at the control panel, guide it
through the opening in the tabletop
(1) to the controller, and
connect it to the socket (X170b).
① ②③
④
(1) - Tabletop opening
(2) - Cable
(3) - Control panel
(4) - Holder