Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015 115
Fig. 77: Connecting the LED sewing lamp
8.9.2 Connecting the setpoint device to the controller
Fig. 78: Connecting the setpoint device to the controller
Connect the setpoint device to the controller as follows:
1. Connect the setpoint device for the main pedal to
connector X5b .
2. If present, connect the setpoint device of the additional pedal
to connector X440; the cable hangs freely in the cable harness.
(3) - Cable (4) - 2-pin plug
③④
①
(1) - Setpoint device for main pedal