Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015114
8.9.1 Connecting the cables to the machine head
Fig. 76: Connecting the cables to the machine head
All cables are color coded.
Connect the machine head cables as follows:
1. Lay the cables to the controller and fix them in place with cable
ties.
2. Insert the plug following the marking on the rear (2) of the
controller.
3. Connect the cable (3) of the LED sewing lamp with the 2-pin
plug (4).
4. Connect the machine ID following the labeling on the rear (2)
of the controller
(1) - Front side (2) - Rear side
②①