Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015112
8.8 Inserting the machine head
Fig. 75: Inserting the machine head
To mount the machine head:
1. Using the transport eye (1), lift the machine head and insert it
into the cut-out on the tabletop.
2. After the machine head has been placed in position, immedi-
ately tighten the mounting plate (2) which prevents the machine
head from coming loose if the tabletop is tipped.
The mounting plate is included in the accessory pack for the
machine head.
If the machine is supplied ready assembled, the transport eye is
included in the accessory pack.
(1) - Transport eye (2) - Mounting plate
①
②
WARNING
Risk of injury from moving parts!
Risk of crushing due to the machine head tipping.
When transporting the machine, secure the
machine head against tipping.