Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015108
5. Tighten the knee lever at (3).
6. Tighten the strain relief mechanism at (4)
(chipboard screws 3.5 x 17).
7. Tighten the cable duct (40 x 40 x 250 mm long) at (6)
(chipboard screws 3.5 x 17).
8. Tighten the setpoint device for the main pedal at (7)
(chipboard screws 4 x 20).
9. Tighten the setpoint device for the additional pedal at (5)
(chipboard screws 4 x 20).
Larger scale diagrams can be found in the appendix ( p. 149).
8.5 Attaching the tabletop and pedals to
the
stand
Fig. 72: Attaching the tabletop and pedals
(1) - Tabletop
(2) - Stand
(3) - Screws
(4) - Main pedal
(5) - Stand strut
(6) - Thread reel holder
⑥①
②
③
④
⑤