Operation Manual

Settings via software
Operating Instructions 610-01/630-01 - 02.0 - 08/201574
7.5.1 Adjustable parameters in MAN mode
The following table describes the adjustable parameters in
the manual operating mode MAN.
1. Press the desired button.
 The user interface for adjusting the desired parameter is dis-
played.
With some parameters, the
setting extends beyond a numerical
value. These parameters are explained in the following.
Icons Meaning
Set fullness,
 pg. 75.
Enter the needle thread tension.
Enter stitch length in mm.
Other program parameters in the manual mode
MA
N,
 pg. 76.