Operating instructions

Setting the sew ing equipment

–

Press the keys “P” and “F” of the control panel simultaneously.

–

Enter code “2548”.

–

Press the “OK”key.

The control switches to the technician level.

–

Select the menu “500" (configuration automatic buttonholer).

–

Press the “OK”key.

–

Select the menu “511"

–

Press the “OK”key.

–

Set the sewing equipment (the seam width will then be adjusted

automatically to match the sewing equipment - see table).

Class Sew ing equipment

narrow w ide

559 - 151 E1501 E1521

E1502 E1522

E1504 E1524

E1551 E1571

E1553 E1573

E1590 E1595

Correction

–

Unscrew the side cover at the arm 1.

–

Screw out screw 3.

–

Screw the screw in drill-hole A or B according to the desired seam

width.

–

Switch the machine on.

Attention: Danger of breakage!

After altering the seam width, correct the looping stroke in any case.

B2 A 1

BA 3