Operating instructions

8.6 Arrest of the clamping plates

Caution: Danger of injury!

Exercise utmost caution when making adjustments with the machine

running.

Standard checking

There must be a minimum clearance in the height of the inserted

clamping plates 2 when:

no material is loaded

approx. 8 mm thick material is loaded and the clamps are closed.

–

Insert the clamping plates.

–

Switch the machine on.

–

Close the fabric clamps.

–

Check at the fabric clamp fixture 1 w hether the clamping plate can

be minimally lifted.

–

Load 8 mm thick material.

–

Check at the fabric clamp fixture 1 w hether the clamping plate can

be minimally lifted.

Correction

–

Switch the machine off.

–

Remove the clamping plates.

–

Loosen the core pin 3.

–

Adjust the stop 4.

–

Tighten screws 3.