Operating instructions

Correction clamping plate

–

Switch the machine on.

–

Press the keys “P” and “F” on the control panel simultaneously.

–

Enter code “2548”.

–

Press key ”OK”.

The control switches to the technician level.

–

Select the menu “601” with the key “+”.

–

Switch the menu on with key ”OK”.

–

Select the function “Y03” (closing the fabric clamp).

–

Press the key ”OK”.

The fabric clamps close.

–

Loosen the screws 6.

–

Set the distance X to 1.3 mm (basic adjustment) with the hexagonal

spanner 5.

–

Tighten the screws 6.

–

Select the function “Y04”.

–

Press key ”OK”.

The fabric clamps spread.

–

Loosen screw 7.

–

Set the distance X to 0.3 mm with the hexagonal spanner 8.

–

Tighten screw 7.

–

Adjust the left clamping plate as well.

Note!

The desired spreading must only be set with the screws 6 according to

the sewing material used.

X65