Operating instructions

8.3 Adjusting the spreading

Caution: Danger of injury!

Exercise utmost caution when making adjustments with the

machine running.

Standard checking

The distance X between the clamping plates 2 and the fabric support

plate 1 should amount to 1.3 mm (non-spreaded) and to 0.3 mm

(spreaded).

–

Insert the clamping plates 2 and switch the machine on.

–

Press the keys “P” and “F” on the control panel simultaneously.

–

Enter code “2548”.

–

Press key ”OK”.

The control switches to the technician level.

–

Select the menu “601” with the key “+”.

–

Switch the menu on with key ”OK”.

–

Select the function “Y03” (closing the fabric clamp).

–

Press key ”OK”.

The fabric clamps close.

–

Check whether the distance X amounts to 1.3 mm.

–

Select the function “Y04”.

–

Press key ”OK”.

The fabric clamps spread.

–

Check whether the distance X amounts to 0.3 mm.

2X 1 4