Operating instructions

Correction

–

Switch the machine on and press the keys “P” and “ß”onthe

control panel simultaneously.

–

Enter code “2548”.

–

Press key ”OK”.

The control switches to the technician level.

–

Select the menu “603”with the k ey “+”.

In this mode the step motors are dead.

–

Switch the menu on with key ”OK”.

Caution: Danger of injury!

Exercise utmost caution when making adjustments with the machine

running.

–

Shift the fabric support plate manually to the desired measurement.

–

Loosen the screws 5.

–

Set the switch sheet 4 to the switch actuation point.

When shifting the switch sheet 4 the switching signals are

indicated on the control panel (inlet r2).

–

Tighten the screws 5.

–

Switch the machine off and on again.

–

Let the machine move to its initial position and check the

measurement.

Correction of the distance betw een reference sw itch and sw itch

sheet

–

Loosen the nut.

–

Screw the reference switch 6 out or in so that the distance between

reference switch 6 and switch sheet 4 does not exceed 0.5 mm.

–

Tighten the nut.

54 6