Operating instructions

Correction

–

Switch the machine on and press the keys “P” and “ß”onthe

control panel simultaneously.

–

Enter code “2548”.

–

Press key ”OK”.

The control switches to the technician level.

–

Select the menu “603” with the key “+”.

In this mode the step motors are dead.

–

Switch the menu on with key ”OK”.

Caution: Danger of injury!

Exercise utmost caution when making adjustments with the machine

running.

–

Shift the fabric support plate manually in such a way that the

dimensions X1 and X2 are equal.

–

Loosen screw 7.

–

Turn the switch sheet 6 to the switch actuation point.

When turning the switch sheet 6 the switching signals are indicated

on the control panel (inlet r1).

–

Tighten screw 7.

–

Switch the machine off and on again.

–

Let the machine move to its initial position and check the position

of the fabric support plate.

Correction of the distance betw een reference sw itch and sw itch

sheet

–

Loosen the nuts 8.

–

Screw the reference switch 5 out or in so that the distance between

reference switch 5 and switch sheet 6 does not exceed 0.5 mm.

–

Tighten the nuts 8.

76 85