Operation Manual

Maintenance

Operating Instructions 610-10/630-10 - 00.0 - 01/201690

Fig. 51: Checking the operating pressure

To set the operating pressure:

1. Pull the pressure controller (1) up.

2. Turn the pressure controller (1) until the pressure gage (2)

indi

cates the desired operating pressure.

• Increase pressure = turn clockwise

• Reduce pressure = turn counterclockwise

3. Push the pressure controller (1) down.

6.3.2 Draining the water condensation

(1) - Pressure controller (2) - Pressure gage

①

②

NOTICE

Property damage from excess water condensation!

Too much water condensation can result in damage to the

chine.

If necessary, drain the condensation water as described.