Operation Manual

Maintenance
Operating Instructions 610-10/630-10 - 00.0 - 01/201688
If necessary, fill oil through the filler openings (1) as follows:
1. Add oil up to but not past the maximum level mark (2).
Looper lubrication
Fig. 50: Looper lubrication
Checking the oil level
1. Tilt the machine head ( p. 38).
2. Check the fill level in the oil reservoir (2) of the looper drive
housing.
3. Erect the machine head again.
(1) - Screw plug
(2) - Oil reservoir
(3) - Minimum level mark
(4) - Maximum level mark
NOTICE
Property damage from inco
rrect oil level!
Too little or too much oil can damage the machine.
Top off oil as described.
①
④
③
②