Operation Manual

Settings via software
Operating Instructions 610-10/630-10 - 00.0 - 01/201680
Prerequisite:
• Operating mode EDIT is displ
ayed.
Use the length correction as follows:
1. Tap the P
LEN
button.
 The
LENGTH CORRECTION user interface is displayed.
Fig. 47: Length correction (1)
2. Complete the sewing step in the appropriate size.
 The
sewn seam segments are measured automatically, and
the sewing steps are adjusted in the sewing program.
3. Select the next sewing step by tapping the number of the 1
st
sewing step or by pressing the Knee button.
 The
sewing progress is displayed graphically.