Operation Manual

About these instructions

6 Operating Instructions 610-10/630-10 - 00.0 - 01/2016

Disturbances

Specifies the disturbances that can occur due to an incorrect

setting.

Cover

Specifies which covers must be re

moved in order to access the

components to be set.

Steps to be performed when operating the machine

(sewing and equipping)

Steps to be performed for service, maintenance, and

stallation

Steps to be performed via the software control panel

The individual steps are numbered:

First step

Second step

The steps must always be followed in the specified order.

Lists are marked by bullet points.

Result of performing an operation

Change to the machine or on the display/control panel.

Important

Special attention must be paid to

this point when performing a step.

Information

Additional information, e.g. on alternative operating options.

Order

Specifies the work to be performed before or after a setting.

etc.

•

