Operation Manual

Settings via software
Operating Instructions 610-10/630-10 - 00.0 - 01/201676
Mode
PROGRAMMING
Setting the fullness
Fig. 44: Set the fullness
Buttons for manually inputting the fullness are displayed in the left
pane.
Symbols/buttons Meaning
Input the fullness.
The fullness setting is displayed by a but-
ton highlighted in red.
Select the type of fullness:
• Top (top feed)
• Lower (lower transport)
• Top and bottom
(differential top and bottom feed)
The fullness selected is displayed in an
activated contr
ol field.
Display of further buttons for inputting the
fullness. The b
uttons 0 to 16 are available
for input.