Operation Manual

Settings via software
Operating Instructions 610-10/630-10 - 00.0 - 01/201674
To set a parameter:
1. Tap the desired button.
 T
he user interface for setting the desired parameter is
displayed.
For some parameters the setting is more
than just a numerical
value. These more complex parameters are described in detail
below.
Set the sewing material size,  p. 75
Other program parameters under
PROGR
AMMING,  p. 77
Set the fullness in the current sewing step,
 p. 76
Set the needle thread tension in the current
sewi
ng step
Set the stitch length in mm in the current
sewi
ng step
Switch the seam length measurement in
the curr
ent sewing step on or off
Other sewing step parameters under
PROGR
AMMING,  p. 78
Symbols/buttons Meaning