Operation Manual

Settings via software
Operating Instructions 610-10/630-10 - 00.0 - 01/201668
Fig. 38: Other program parameters in operating mode EDIT
Parameter Meaning Value range
Stitch Condensing at Start Stitch condensing at seam
beginning
on (= 1) or off (= 0)
0 – 1
Stitch Condensing at End Stitch condensing at seam
end
on (= 1) or off (= 0)
0 – 1
Thread Trimmer Thread trimmer
on (= 1) or off (= 0)
0 – 1
Thread Tension at Hook Looper thread tension 1 – 99
Adjust Bottom Fullness
in %
Fullness correction
pa
rameter bottom (%)
-50 – 50
Adjust Flat Sewing in % Flat sewing correction,
only when sewing without
full
ness (%)
0 – 50