Operation Manual

Settings via software
Operating Instructions 610-10/630-10 - 00.0 - 01/201666
The following information is displayed:
• Divided into up to 4 segments, each size table illustrates
the
corresponding size groups. The currently selected size
is indicated by a double arrow (>>).
• The sizes marked in red indicate the sizes in which the
sew
ing program was created or modified.
To set the sewing material size:
1. Select the size table.
2. Tap the desired sewing material size.
 User i
nterface EDIT is displayed.
Mode EDIT Setting the fullness in the current sewing step
Fig. 37: Setting the fullness
Buttons for manually inputting the fullness are displayed in the left
pane.