Operation Manual

Settings via software
Operating Instructions 610-10/630-10 - 00.0 - 01/2016 65
To set a parameter:
1. Tap the desired button.
 T
he user interface for setting the desired parameter is
displayed.
For some parameters the setting is more
than just a numerical
value. These more complex parameters are described in detail
below.
Mode EDIT Setting the sewing material size
Abb. 36: Setting the sewing material size
Setting the stitch length in mm
Switch the seam length measurement in
the curr
ent sewing step on or off
Other sewing step parameters in EDIT
oper
ating mode,  p. 69
Symbols/buttons Meaning