Operation Manual

Settings via software
Operating Instructions 610-10/630-10 - 00.0 - 01/201664
Right pane (4)
Here, sewing programs can be created( p. 69), deleted
( p. 79), copied ( p. 79) and optimized ( p. 79).
5.5.1 Parameters that can be set
The following table lists the parameters that can be set in EDIT
operating mode.
Symbols/buttons Meaning
Changing the program name
There is only one display in EDIT opera
ting
mode. A new sewing program is automati-
cally assigned the next free program slot.
Select the right or left piece to be sewn
Set the sewing material size,  p. 65
Other program parameters in operating
mode EDIT,  p. 60
Temporarily setting the fullness value until
the next sewing step,  p. 58
Setting the needle thread tension