Operation Manual

Settings via software
Operating Instructions 610-10/630-10 - 00.0 - 01/201662
Correcting the fullness before the seam
1. Press the pedal to position 0.
2. Change the fullness correction using the buttons + F
% or - F%.
3. Press the pedal forward and sew.
 The
changed fullness value is applied and displayed.
Correcting the fullness during the seam
1. Press the pedal to position 0.
2. Use the button to adjust the fullness.
3. Press the pedal forward and sew.
 The
changed fullness value is applied and displayed.
Changing parameters during the seam
1. Press the pedal to position 0.
2. Change the desired parameter on the control panel.
3. Press the pedal forward and sew.
 The
seam will be sewn using the altered parameter value.
Canceling sewing program
1. Press the pedal to position -2.
 The
sewing program is canceled.