Operation Manual

Settings via software
Operating Instructions 610-10/630-10 - 00.0 - 01/201660
2. Tap the OK button.
 T
he correction value is saved, and the previous user inter-
face is displayed again.
Information
If changed in AUTO operating mode, the new correction value
remains active until the controller changes to the next program.
Mode AUTO Other program parameters
A tap on the Other progra
m parameters button will bring up an
overview of all available parameters.
Fig. 33: Other program parameters in operating mode AUTO
Parameter Meaning Value range
Thread Tension at Hook Looper thread tension 1 – 99