Operation Manual

Settings via software
Operating Instructions 610-10/630-10 - 00.0 - 01/201656
To set a parameter:
1. Tap the desired button.
 T
he user interface for setting the desired parameter is
displayed.
For some parameters the setting is more
than just a numerical
value. These more complex parameters are described in detail
below.
Mode AUTO Selecting the sewing program
Fig. 29: Selecting the sewing program
To select a sewing program:
1. Tap the desired sewing program.
 The
selected sewing program is displayed in an activated
control field within the line.
Setting the stitch length in mm.
If changed in
AUTO operating mode, the
value is permanently saved in the sewing
program.
Symbols/buttons Meaning