Operation Manual

Settings via software
Operating Instructions 610-10/630-10 - 00.0 - 01/201652
Fig. 27: Other program parameters in operating mode MAN
Parameter Meaning Value range
Manual Stitch Condensing Manual stitch condensing 0 – 1
Needle Stop Position Up Needle position up when
s
ewing stops
on (= 1) or off (= 0)
0 – 1
Stitch Condensing at Start Stitch condensing at seam
beginning
on (= 1) or off (= 0)
0 – 1
Stitch Condensing at End Stitch condensing at seam
end
on (= 1) or off (= 0)
0 – 1
Thread Trimmer Thread trimmer
on (= 1) or off (= 0)
0 – 1