Operation Manual

Settings via software
Operating Instructions 610-10/630-10 - 00.0 - 01/201650
5.3.1 Parameters that can be set
The following table lists the parameters that can be set in MAN
operating mode.
To set a parameter:
1. Tap the desired button.
 T
he user interface for setting the desired parameter is
displayed.
For some parameters the setting is more
than just a numerical
value. These parameters are described below.
Symbols/buttons Meaning
Setting the fullness,  p. 51
Inputting the needle thread tension
Inputting the stitch length in mm
Other program parameters in operating
mode MA
N,  p. 51