Operation Manual

Settings via software
Operating Instructions 610-10/630-10 - 00.0 - 01/2016 43
5 Settings via software
5.1 Basic operation
All settings for the machine are performed using the OP7000
control panel.
Fig. 23: Basic operation
The activation of the sewing motor and the stepper motors is
performed by the controller.
Up to 999 sewing programs can be saved.
Each sewing program can contain up to 30 sewing steps.
Each sewing step can be assigned various parameters such as
stitch le
ngth, fullness values, thread tension, segment length etc.
The sewing programs are displayed continuously whilst sewing is
i
n progress. Programs can be mirrored for the other side of the
sewing material.
All functions and inputs are triggered by touching the screen.
Numeric values for the individual parameters and text for the
p
rogram names can be input in the individual operating modes.