Operation Manual

Operation

Operating Instructions 610-10/630-10 - 00.0 - 01/201640

4.13 Sewing

The pedal starts and controls the sewing process.

Fig. 22:

Sewing

INITIAL POSITION

• Pedal to position 0 (3):

 The machine is at a standstill.

Need

le and sewing foot are up / down

To position the sewing material:

1. Press the pedal to position -1 (2).

 The

sewing foot is lifted.

. Push the sewing material into the initial position.

3. Press the pedal to position 0 (3).

 The

sewing foot lowers onto the sewing material.

AT SEAM BEGINNING

Proceed as follows to start a seam:

1. Press the pedal (4) forward.

 The

machine sews. The speed increases the further forward

he pedal is pressed.

(1) - Sew stitch condensation and

cut off thread

(2) - Lift sewing foot

(3) - Rest position

(4) - Sewing active

④

②

①

③