Operation Manual

Operation
Operating Instructions 610-10/630-10 - 00.0 - 01/2016 29
To thread the reinforcement tape:
1. Place the reel of reinforcement tape (1) onto the reel holder (2)
and lock it in place using the counter bearing (3).
While doing so, make sure the counter bearing (3) is pressed
agai
nst the reel of reinforcement tape (1).
Fig. 12: Threading the reinforcement tape (2)
2. Insert the reinforcement tape through the guide (4).
3. Feed the tape between transport roller (5) and spring-loaded
pressure roller
(8).
4. Feed the tape through underneath the se
nsor transducer (6).
5. Insert the reinforcement tape through the guide (7).
(4) - Guide
(5) - Transport roller
(6) - Sensor transducer
(7) - Guide
(8) - Pressure roller
⑤
④
⑧
⑦
⑥