Operation Manual

Operation
Operating Instructions 610-10/630-10 - 00.0 - 01/201628
13. Turn the handwheel until the looper hole (10) is accessible.
14. Insert the thread from the right to the left through the looper
hole
s (10) before pulling it out by approx. 3 cm.
15. Press down and lock into place the thread bobbin case
re
tainer (9).
16. Insert the covering plates of the throat plate on the right and
the
left.
4.6 Threading the reinforcement tape
(610-10 only)
Proper setting
Facing the head cover, the reel of rei
nforcement tape must rotate
clockwise when unwinding.
Fig. 11: Threading the reinforcement tape (1)
(1) - Reel of reinforcement tape
(2) - Reel holder
(3) - Counter bearing
①
②
③