Operation Manual

Operation
Operating Instructions 610-10/630-10 - 00.0 - 01/2016 23
4.4 Threading the needle thread
Fig. 4: Threading the needle thread (1)
To thread the needle thread:
1. Fitting the thread reel onto the left plate of the thread reel
holder (2).
2. Feed the thread from the front to the
rear through the 1
st
hole
on the front. Feed the thread from the rear to the front through
the next hole.
Important
The thread guide (1) must be position
ed vertically above the
thread reel holder (2).
(1) - Thread guide (2) - Thread reel holder
②
①