Operation Manual

Operation
Operating Instructions 610-10/630-10 - 00.0 - 01/201622
Fig. 3: Inserting and replacing the needle
To change the needle:
1. Turn the handwheel until the needle bar (1) reaches the upper
end position.
2. Loosen the screw (3).
3. Pull the needle out towards the bottom.
4. Insert the new needle.
Important
Align the needle in such a way that the groove (2) is pointing
to the rear.
5. Tighten the screw (3).
(1) - Needle bar
(2) - Groove
(3) - Screw
①
③
②